How to Connect Edifier M60 to PC

How to Connect Edifier M60 to PC

Learn how to connect Edifier M60 to PC via Bluetooth, USB-C, and AUX. This step-by-step guide covers all three connection methods so you can get your speakers working quickly.

The Edifier M60 is a compact desktop speaker with a clean design and solid sound quality, and one of its best features is the flexibility in how you can connect it. If you just unboxed your M60 and are trying to figure out how to connect the Edifier M60 to PC, you have three options: Bluetooth, USB-C, and a 3.5mm AUX cable. Each method works well depending on your setup. This guide walks through all three so you can pick the one that suits you.

Method 1: Connect Edifier M60 to PC via Bluetooth

Bluetooth is the most popular way to connect the Edifier M60, and it gives you a clean, wireless setup with no cables running across your desk.

How to connect Edifier M60 Bluetooth to your PC:

1. Power on the M60 by pressing and holding the power button on the top of the speaker until the LED light turns on.
2. Put the M60 into Bluetooth pairing mode. Press and hold the Bluetooth button (or the input selection button) until the LED flashes blue rapidly. This indicates the speaker is discoverable.
3. On your PC, open Settings > Bluetooth and devices (Windows 11) or Settings > Devices > Bluetooth (Windows 10).
4. Make sure Bluetooth is toggled on.
5. Click Add device and select Bluetooth.
6. Your PC will scan for nearby devices. Select Edifier M60 from the list.
7. Wait for the connection to confirm. The LED on the M60 will stop flashing and glow steady blue when paired.

Your PC should now play audio through the M60. If it does not switch automatically, go to Settings > System > Sound and set the M60 as your output device.

Method 2: Connect Edifier M60 to PC via USB-C

USB-C is the most reliable connection method for consistent audio quality with no wireless interference. It also keeps the M60 charged while in use.

1. Use a USB-C cable to connect the M60 to a USB-C port on your PC.
2. Press the input button on the M60 to switch to USB-C input. The LED will indicate the active input.
3. On your PC, go to Settings > System > Sound and select the M60 as your output device if it does not switch automatically.

USB-C audio works on most modern PCs and laptops. If your PC has USB-A ports only, a USB-A to USB-C adapter may work, but check that it supports audio data transfer rather than just charging.

Method 3: Connect Edifier M60 to PC via AUX (3.5mm)

The AUX connection is the simplest option and works with any PC that has a headphone jack.

1. Plug one end of a 3.5mm audio cable into the AUX input on the back of the M60.
2. Plug the other end into the headphone output jack on your PC.
3. Press the input button on the M60 to switch to AUX input.
4. Your PC will play audio through the M60 immediately. No driver or software setup is needed.

AUX is a good fallback if Bluetooth connection is unstable or if your PC does not support USB-C audio.

Switching Between Inputs on the Edifier M60

The M60 has a physical input button on the top panel that cycles through the available input sources: Bluetooth, USB-C, and AUX. Press it once to switch between them. The LED indicator changes color or pattern to show which input is active.

If you regularly switch between your PC and a phone or tablet, you can pair the M60 to multiple Bluetooth devices and switch between them using this button.

Troubleshooting Common Connection Issues

M60 not showing up in Bluetooth scan: Make sure the speaker is in pairing mode (LED flashing blue rapidly). If it was previously paired to another device, it may connect to that device automatically. Hold the Bluetooth button longer to reset pairing mode.

No sound after connecting: Check that the M60 is selected as the default output device in your PC’s sound settings. Go to Settings > System > Sound > Choose where to play sound and select the M60.

Bluetooth keeps disconnecting: Move the speaker closer to your PC, reduce interference from other wireless devices, and make sure the M60 firmware is up to date.

The Short Answer

To connect the Edifier M60 to PC, use Bluetooth by putting the speaker into pairing mode and connecting through your PC’s Bluetooth settings, use USB-C for a wired digital connection, or use a 3.5mm AUX cable for the simplest plug-and-play setup. All three methods work well. Bluetooth gives you the cleanest desk setup, USB-C gives you the most stable audio, and AUX works on any PC instantly.